How do you install a pop up sprinkler NZ?

How do you install a pop up sprinkler NZ?

Steps

  1. 1Check before you start digging.
  2. 2Roll out the poly pipe.
  3. 3Dig out the trench.
  4. 4Lay the poly pipe.
  5. 5Cut the pipe and fit the attachments.
  6. 6Attach the pop-up sprinklers.
  7. 7Seal the end of the pipe.
  8. 8Cover the pipes and pop-ups.

Are pop up sprinklers good?

A massive benefit of choosing a pop up sprinkler system over a traditional lawn sprinkler set up is the massive reduction in water use, as the pop up sprinklers, when installed correctly, deliver water precisely and efficiently throughout the garden, eliminating wastage.

How deep should a pop-up sprinkler be?

They advise that pipes should be trenched to a minimum of 400mm (15.8 inches) below the surface. This is to help avoid accidental punctures of the pipe and therefore lower maintenance costs in the future.

How many pop-up sprinklers per zone?

At different pressures, the sprinkler head and nozzle will consume different amounts of water. For example, at 35 pounds per square inch (PSI) the 5000 Series Rotor using the 3.0 nozzle will use 3.11 gallons per minute (GPM). If your home’s water capacity was 10 GPM, you could place 3 heads per zone.

How deep are sprinkler pipes buried?

8 to 12 inches
In most areas, burying the pipes 8 to 12 inches below the surface is adequate. This measurement is from the top of the pipe to the surface of the soil, which means your trenches must be slightly deeper to accommodate the pipes.

How much pressure do pop-up sprinklers need?

We’re Talking PSI The optimum operating pressure for most residential sprinkler heads is between 30 and 50 pounds per square inch (PSI). With correct water pressure, each head will perform the way they were designed, and the result will be even spray-patterns and efficient use of water.

How far apart do you put pop up sprinklers?

Because of the lower PSI the distance of the spray rarely exceeds 15ft. Meaning that spray heads should never be placed further than 15 ft. apart as this would create dry spots (i.e. dead grass) in your lawn. It is always important to install sprinklers with overlap for full coverage.

How many pop up sprinklers per zone?

How tall is a Hunter Pro spray sprinkler head?

Hunter engineered the Pro-Spray sprinkler heads to ensure long-lasting, reliable performance in residential applications. Measurement is for pop up height (how high the sprinkler pops above ground level); it is not the length of the body.

How does a Hunter MP sprinkler system work?

The revolutionary MP Rotator features a unique, multi-trajectory rotating stream delivery system that achieves water-conserving results. Rather than “spray” water onto landscapes, MP Rotators deliver multiple streams of water at a steady rate.

Is the Hunter sprinkler head compatible with female nozzles?

The Hunter Pro-Spray sprinkler head is compatible with all industry-standard female nozzles offering a high degree of flexibility.

What’s the measurement for pop up sprinkler heads?

Measurement is for pop up height (how high the sprinkler pops above ground level); it is not the length of the body. Pro-Spray heads feature durable construction that is second to none, an exclusive body cap design that does not leak even when loosened, and a reliable, easy to adjust two-piece ratchet.